Features:

 

Fabrication:    Made in The Netherlands, Germany

Material: ABS (smartABS)

Quantity: 500g

Filament diameter: 1.75 & 3.0 mm + / - 0.1 mm

Molding Temperature: 230 ° C - 255 ° C

Coil version (id. MakerBot coils): Length x height x hole: 200 x 60 x 55 mm

Colors style: Opaque

Ovalidity tolerance (max): ± 5%

Density (21.5 ° C) 1060 kg / m³

Print settings: such as ABS (Slicer Features)

Impact resistance: 15 KJ/m2

Tensile strength: 2000 MPa

 

 

Description:

 

The extended version of the house of ABS ( smartABS ) can melt very well and print , because of its strong melting properties (up to 80 % less bulges during printing ) . The individual layers tend to up to 35% less curvature. Basis for this comparison offer conventional ABS filaments at test trials with 10 different ABS filaments.ABS is well suited for coating with metals (galvanizing ) and polymers. This makes it possible for example to obtain a chromium-plated surface of a plastic part . Examples of the use of ABS are thermoformed parts from sheets and films , automotive and electronics parts, motorcycle helmets , toys (for example Lego blocks) , housings for electrical appliances , edge bands ( lipping ) in the furniture industry , consumer goods with increased demands on the impact strength , Musical instruments (eg clarinet and saxophone mouthpieces or ukulele cabinets , guitars bindings ) and the side walls of manufactured in sandwich construction skis and snowboards.